6-10 PTZ ControlPTZ Control
Compro IP540(P) / IP570(P)
RTP
If you want to broadcast video using RTP (Real-time Transport Protocol), you can set up the port range, video/
audio address and port number here.
PTZ Control
Here you can manage your camera’s preset view points (or positions). And congure the patrol mode to let
the camera patrol the preset positions.
Figure 6-11. PTZ control page
Preset Points
Add Preset Points
Firstly use the arrow buttons to move the IP camera to the desired position. And then type the name into
the [Position Name] eld, and press the [Add] button. If you would like to set the position as preset Home
position,pleasecheck[Usethecurrentpositionas“Home”]button.TheHomepositioncanbeaccessed
on the live view page by pressing the Home button. If you want the camera to always return to home
position after a position change, check [Auto return to “Home“ position], input the period of time (between
30 to 300 seconds) in which the camera stays in the new position, and press [Save] button. Then whenever
the camera changes to a new position, it will automatically return to its Home position after this period of
time expires.
Kommentare zu diesen Handbüchern